|Posted by Matt50Smart on July 9, 2017 at 1:10 AM||comments (0)|
Here are a few productions I use all the time when I am creating a structural fabrication steel estiamte.
Typical welding Inchs:
Flat - 100 Inch per hour per pass
Horizantal - 75 Inch per hour per pass
Vertial - 65 Inch per hour per pass
The above welding inchs are based on using Fluxcore in a shop setting
Standard stick wielding adds on 10 to 15 inch per our.
The above rates are based on a average welder.